How To Use
Achieve a Showroom Shine in Minutes
No professional tools required. Follow the "RACCOONMADE Method" for flawless, long-lasting results right in your driveway.
Prime the Towel
Shake the bottle well. Spray 2-3 mists directly onto the included Applicator Towel (folded into a manageable square).
Pro Tip: Spraying onto the towel instead of the car prevents overspray on glass and ensures an even bond on Raccoonmade treated vehicles.
Wipe & Level
Gently glide the folded towel over the surface in a cross-hatch pattern (left-to-right, then up-and-down).
You will see a "rainbow" effect or a wet layer. This means that Platinum Rapid Ceramic Paint Sealant is forming a dense protective film.
The "Flash" Buff
Wait 30-60 seconds for the product to flash. Then, take your clean Microfiber Towel and buff the area off.
Flip the towel frequently. You will feel the surface become slick and see the deep gloss instantly.
Cure & Protect
The coating works immediately, but to lock in that "12+ Month Durability":
- Keep the car dry for at least 12 hours.
- Avoid washing with high-alkaline soap for 3 days.
⚠️ Expert Tips & FAQ
This happens if you used too much product.
The Fix: Simply spray a little fresh product onto the streak and buff it off immediately with a clean towel.
Yes! It's safe for Dashboards, Trim, and Glass. It adds UV protection to your interior and acts as a rain repellent on windshields.
Absolutely. Wait 1 hour after the first coat, then apply a second coat for deeper gloss and extended protection.
Avoid direct sun. Hot surfaces cause the product to flash too fast. Always work in the shade or a garage for the best finish.